Phoenix painting contractors are far too familiar with instances of painting novices being disappointed with the outcomes of their do-it-yourself projects, simply because they didn’t have the right guidance before taking on the task. In many cases, the issue goes all the way back to which paints belong where. Learn all about appropriate painting surfaces to ensure you never have to worry about mess-ups with your DIY projects!

Ceilings

If you are painting an entire room, our Glendale AZ painters recommend starting with the ceiling and then doing the walls. When redoing coats of white, it can sometimes be hard to tell which areas have been touched up and which haven’t. It is for this reason that certain painting manufacturers make ceiling paint that looks light pink or blue when originally applied, but turn white once dry.

Walls

Of all the paintable surfaces, walls are probably the most straight-forward. Always make sure to clean your walls before you begin the painting process. For plaster walls, it’s a good idea to use a stain-blocking primer to hide any unwanted smudges or marks. Eggshell is a popular paint for walls. It give a perfect finish for most rooms and does its part in concealing scrapes and bumps.

Doors

Doors are a little bit more specific. A door requires the same amount of cleaning and prep-work as a wall; it just needs more specialized materials. Before you even start, remove the door knobs and any other hanging decorative materials. Then, select an oil-based primer and sealer to coat the door thoroughly. This will secure the existing stain on the door. Once the primer is completely dry, apply two more coats of a gloss or semi-gloss paint of your choice of color. Voila!

Wood Floors

Like doors, wood floors can be tricky. In addition to cleaning the entire surface you want to paint, you will also need to sand the area. If this is an area in your house that gets a lot of traffic throughout the day, be sure to close it off from small children and pets. Then apply an oil base sealer. Start in a corner when applying the stain and work your way outward to avoid stepping in it and ruining the seamless finish. Once the sealer is dry, you have your option of a water-based or oil-based varnish. Most Phoenix painting contractors prefer a water-base simply because oil-bases tend to wear out more quickly

Metal

Once again, cleaning is the most important step in this painting process, so don’t forgo it! Start by scraping off any rust you may find and then wipe down the surface with a damp cloth so that no dust or grime gets painted on. Apply one or two coats of metal primer, or select a paint that includes a rust-repellant. Spray paint is a popular choice for metal projects, so if you select it be sure to hold the aerosol bottle 10-12 inches away from your metal surface to avoid unwanted splotches.


Still unsure of how to go about your painting endeavors? Contact the Phoenix and Glendale AZ painters at the Arizona Painting Company for a color consultation today! Be sure to visit http://www.arizonapaintingcompany.com/ for more information and take a peek at our blog!